DITRA-HEAT Cable · 83 Sq Ft (120V)
DITRA-HEAT Cable · 83 Sq Ft (120V)

DITRA-HEAT Cable · 83 Sq Ft (120V)

DITRA-HEAT Cable DHEHK12083 provides radiant heat to 83 sq ft of floor area when installed at a 3-stud spacing in a DITRA HEAT Membrane. Cover with KERDI-BAND to waterproof the system.
Vendor: Schluter-Systems
SKU: DHEHK12083
CA$614.89
CA$683.21
CA$614.89
Description
Description
x

DITRA-HEAT twisted pair heating cable is designed to snap into DITRA-HEAT uncoupling membrane.

Manufactured by Schluter-Systems, EMF-cancelling DITRA-HEAT radiant heating cable installs directly into DITRA-HEAT or DITRA-HEAT-DUO cable installation membrane (sold separately) for use under tile or stone flooring.
Additional benefits include:

•  3-stud spacing is standard spacing (generates 12.7 Watts per square foot)

    •  NEW alternate spacing is now an option for more heat output

•  Low profile of 4.8mm for cable and 5.5mm with membrane

•  Compatible for shower floor and benchtop installation

•  Significantly reduced installation time. No self-leveler required!

•  120V and 240V options available in a variety of lengths

•  15-Year Manufacturer Warranty with opportunity to extend

  IMPORTANT Information

  • Do not purchase a heating cable the same size as the area to be tiled; this will be too much heating cable!
  • Be sure to only measure the open floor area and not under objects such as cabinets and tubs.
  • Never CUT the heating cable. This would change the cable resistance and could lead to a fire.

 

Cable spacing of 3 studs is standard, but closer spacing of 3-2-3-2 provides more heat or allows you to “use up” extra cable if you have too much. 4 stud spacing is NOT recommended.

Instructions
Instructions
x

Instruction manual link:
DITRA-HEAT Installation Handbook

Indoor / Outdoor: INTERIOR floor heating application only. Embedded in mortar or self leveler only

Maximum Circuit Load: 16

Maximum Circuit Overload Protection: 20 Amp Breaker

Distance from Toilet: Minimum of 7" from the centerline of the toilet drain

Specification
Specification
x
UPC 4011832146268
Heating Power Output per Hour (BTU) 3599.81
Power Lead Wire Gauge 18 AWG
Power Lead Length 7'
Power Lead Type Armored, NEC color code, Single point connection at 1 corner of mat. No return wire like inferior products
Voltage 120 VAC
Wattage per SF 12.7 at 3-stud spacing
Spacing of Heating Wire Varies
Heated Area Size Covered 83
More Details
More Details
x
Brand Name DITRA-HEAT
Safety Listing Listed under CAN/CSA-C22.2 No. 130-03.
Warranty from Manufacturer 15-Year Limited Warranty
Spacing between runs 1 3 stud spacing
Spacing between runs 2 3-2-3-2 stud spacing
BTUs/SF/Hr 1 43.2
Watts Per SF 1 12.7
Watts Per SF 2 15.3
What's In The Box (1) 83.3 sq ft 120V cable, (1) sensor wire
Amp Draw 8.8
Wire Construction Dual Wire
Total Watts 1055
Acceptable Floor Coverings Tile, Natural Stone