Nuheat Custom Mats are one of our top products. They come ready to fit the room, eliminating the need to configure the heating wires during installation. They will match the exact dimensions provided by you, even for the most complex layouts.
Send us a sketch of your layout and we will get you a quote in 24 hours or less!
Once the quote is approved, the custom mat will be manufactured in only three days.
Nuheat Custom Mat Installation Manual
Indoor / OutdoorINTERIOR floor heating Application only. Embedded in Mortar only.
15 Amps
Maximum Circuit Overload Protection20 A Breaker
Shower InstallationYes, can be installed in a tiled shower.
Trowel Size recommendedMinimum 3/8" x 1/4". Works for most ceramic tile; verify with tile/mortar manufacturer.
Distance from ToiletInstall 4-6" away from the toilet drain wax ring. It can be under the front of toilet - Approximately 20" from wall.
Power Lead Wire Gauge | 18 AWG |
---|---|
Power Lead Length | 10' |
Power Lead Type | TEW Wire with Stainless Steel ground braid rated to 105 C and 300v max. |
Thickness | Mat is .083", total is 1/8" with thinset underneath. |
Voltage | 240 VAC |
Wattage per SF | 12 |
Spacing of Heating Wire | 2.0" |
Heated Area Size Covered | 60 |
Brand Name | Nuheat |
---|---|
Warranty from Manufacturer | 25 year warranty |
What's In The Box | Nuheat Mat, Complete instructions. Installation videos online. |
Amp Draw | 3 |
Wire Construction | Copper/Copper Alloy Heating wire insulated with ETFE and surrounded with protective Stainless steel ground shield. |
Total Watts | 720 |
© Warm Your Floor. 2023. All Rights Reserved.
Thanks for subscribing!
This email has already been registered!