Nuheat Mesh Mat 20 in x 52 ft (240V) heats 85 sq ft

The Nuheat Mesh floor heating system heats bathrooms, showers, kitchens, entryways and other living areas when using Tile, Stone, Laminate or Engineered wood floors.

Nuheat Mesh is easy-to-install and can be customized on site to fit your room; simply cut and turn the mat to fit. The fiberglass mesh holds the heating cable securely and is coated with an adhesive which grips the subfloor surface eliminating the need for tape or staples to hold it in place while installing. Providing 12 Watts per square foot, the Heating cable’s design is durable; 2 wires surrounded by a grounding mesh and covered with a PVC outer jacket, with a thin and flexible power lead 10 Ft long (118”) pre-attached.

There are 32 sizes in 120 & 240V - select the Square Footage needed to heat your floor & place the mat wherever you want warmth; remember, no mesh mat means no heat.

• Sticky fiberglass mesh is self-adhesive – the “sticky” coating grabs the subfloor
• Versatile cut-and-turn placement allows your 20” wide mesh to go where you need it to get the job done
• 2-step installation - Nuheat recommends that you: 1, cover mesh with Self Leveler or thinset, then 2, set tile in thinset once first layer is cured.
• Low profile 3/16” thickness (0.188”) will have a minimal effect on floor height
• Thin power lead and connection joint of 16-18 AWG wire covered with metal ground shield and outer black jacket.
• Durable & Zero EMF (Electro Magnetic Field) heating cable uses a proven Nuheat design that is extremely reliable