Snow Melting systems operate best when they are connected to automatic controls and you save money because the control activates your system only when needed and then shuts off automatically.
The PM-2C sensor-controller detects the combination of precipitation PLUS low temperature to activate the ProMelt Mats or Cables. It is meant to be pole-mounted open to the sky and elements with a fixed moisture sensor mounted on its top.
PM-2C automatically controls 30 Amps of snow melting – approximately 145 Sq Ft of 50 Watts/SF at 240v 30 Amp Maximum.
The ProMelt PM-2C offers automatic activation, rain/snow detection, adjustable trigger temperature, and a drying cycle, as well as manual operation. It is a stand-alone control (no CP Contactor Panel required) intended for relatively small systems up to 30 Amps or approximately 145 Sq Ft at 50 Watts/SF. It cannot be used with our Contractor Pro series of ProMelt controls, as those are designed for 24V control sensors (PM-224 or 824). The unit measures approximately 5"x7"x3".
We recommend adding the optional PM-DP remote ProMelt Display Panel for the easiest monitoring and control of your PM-2C sensor. The PM-DP wired remote is a great upgrade and is sold separately.
Promelt 300600 PM-2C SnowSensor 120/240 30A Installation Manual
UPC | 840213099619 |
---|
Brand Name | ProMelt |
---|
© Warm Your Floor. 2023. All Rights Reserved.
Thanks for subscribing!
This email has already been registered!