Schluter DITRA-HEAT Kit with Cable, PEEL & STICK Membrane & WiFi Programmable Thermostat
Schluter DITRA-HEAT Kit with Cable, PEEL & STICK Membrane & WiFi Programmable Thermostat
Schluter DITRA-HEAT Kit with Cable, PEEL & STICK Membrane & WiFi Programmable Thermostat
Schluter DITRA-HEAT Kit with Cable, PEEL & STICK Membrane & WiFi Programmable Thermostat
Schluter DITRA-HEAT Kit with Cable, PEEL & STICK Membrane & WiFi Programmable Thermostat
Schluter DITRA-HEAT Kit with Cable, PEEL & STICK Membrane & WiFi Programmable Thermostat
Schluter DITRA-HEAT Kit with Cable, PEEL & STICK Membrane & WiFi Programmable Thermostat
Schluter DITRA-HEAT Kit with Cable, PEEL & STICK Membrane & WiFi Programmable Thermostat
Schluter DITRA-HEAT Kit with Cable, PEEL & STICK Membrane & WiFi Programmable Thermostat
Schluter DITRA-HEAT Kit with Cable, PEEL & STICK Membrane & WiFi Programmable Thermostat

Schluter DITRA-HEAT Kit with Cable, PEEL & STICK Membrane & WiFi Programmable Thermostat

This Schluter DITRA-HEAT KIT contains everything you need to install a complete floor heating system.
Vendor: Schluter-Systems
SKU: PSW-DH24032
CA$700.00
CA$766.47
CA$700.00
Description
Description
x

This 240V DITRA-HEAT Kit contains everything you need to install a complete floor heating system:

  • 1 Spool of DITRA-HEAT Cable (DHEHK24021) - Warms 21 sq ft
  • 1 DHERT105/BW SMART WiFi Programmable Thermostat (touchscreen)
  • 2 Sensor Wires
  • 4 DITRA-HEAT (DHPS5MA) PEEL & STICK Uncoupling Membrane Sheets - Covers 34 sq ft

DITRA-HEAT-PS-Membrane SHEET - Peel & Stick for Quick & Easy installation.

Schluter®-DITRA-HEAT-PS is a peel-and-stick membrane that features a pressure-sensitive adhesive (PSA) to bond the membrane to the substrate, eliminating the need for thin-set mortar. Quick and easy to install, DITRA-HEAT-PS integrates customizable, comfortable electric floor warming with the same functions associated with DITRA-HEAT: uncoupling, waterproofing*, vapor management, and load support to ensure a long-lasting tile installation.

Membrane installation is even easier now without thin-set under the mat using Peel & Stick. To install, peel the release film off DITRA-HEAT-PS and place the membrane on the substrate. It can be lifted and re-positioned providing no pressure has been applied to it. However, once pressure has been applied the adhesive sticks the membrane firmly to the substrate. The heating cables can be installed immediately after adhering the membrane to the subfloor.

  • Cables can be snapped into place wherever heat is desired, which significantly reduces installation time and effort.
  • For optimal performance with difficult-to-bond-to substrates, use Schluter®-PRIMER-U or another suitable primer.
  • Tile directly over Ditra-Heat or pour self-leveler over the top to install alternate floor coverings like:
    • Engineered Wood, floating or glued-down Laminate
    • Luxury Vinyl Tile & Plank (LVT/LVP)
    • Vinyl
    • WPC or Wood Plastic Composite core flooring
    • SPC or Stone Plastic Composite core flooring

Note: Product shown is a kit put together by Authorized Distributor Warm Your Floor containing individual genuine Schluter® products.

Instructions
Instructions
x

Instruction manual link:
DITRA-HEAT Installation Handbook

Video:

Indoor / Outdoor: INTERIOR floor heating application only. Embedded in mortar or self leveler only

Install Steps:

Ensure your sub floor is clean, even, and load bearing. Bond inhibiting surfaces must be removed prior to the application of DITRA-HEAT. For complete installation guidelines and warranty criteria, please refer to the included instruction manual or at the link displayed above.

Note: Type, thickness, and format of the tile or stone surface covering must be at least 2" x 2" (5 cm x 5 cm).

Maximum Circuit Load: 15 amps

Maximum Circuit Overload Protection: 20 A breaker

Distance from Toilet: Minimum of 7" from the centerline of the toilet drain

Specification
Specification
x
Manufacturer Schluter-Systems
Thickness ~ 0.25 inches
Wattage per SF 12.75
Spacing of Heating Wire 3-stud and 3-2-3-2-stud spacing. (Tension loop can be made around a single stud if necessary. See installation handbook for details.)
More Details
More Details
x
Brand Name DITRA-HEAT
Safety Listing UL Listed
Warranty from Manufacturer 10-25 year limited manufacturer warranty
Spacing between runs 1 3 stud spacing
Spacing between runs 2 3-2-3-2 stud spacing
BTUs/SF/Hr 1 43.2
Watts Per SF 1 12.7
Watts Per SF 2 15.2
Acceptable Floor Coverings Tile and Stone, Engineered Wood, floating or glued-down, Laminate, Luxury Vinyl Tile & Plank (LVT/LVP), Vinyl,WPC or Wood Plastic Composite core flooring, SPC or Stone Plastic Composite core flooring.